Coswick is fully committed to creating hardwood floors of top quality, durability and long lasting performance. The company permanently invests in research and development of cutting-edge technology to maintain the highest level of product quality.The main features of the Coswick 2-Layer T&G Engineered Flooring are as follows:

• Top wear layer is 4 mm thick and can be sanded up to 4 times. Coswick uses only sawn lamellas for the top layer. Sawn hardwood lamellas have no internal checks that could cause face splits later on. Sawn hardwood lamellas are 100% solid wood and preserve the rich grain texture appearance.

• Moisture-resistant birch 7-layer plywood is used for base layer. Precuts on bottom side provide flexibility and straightening of the planks. Plywood base emission class is E1 (EN 14342).

• Due to multilayer plywood base flooring has minimal movement and maintain superb dimensional stability through seasonal humidity fluctuations.

• High-adhesion hot-melt polyurethane glues are used to bond top lamella to plywood base. Extra strong bonding and moisture-resistant birch plywood ensure that no delamination occurs even under elevated moisture conditions or flooding. Coswick polyurethane adhesives are 100% formaldehyde free and are environmentally friendly.

• High-adhesion hot-melted polyurethane glues are used to bond lamellas and middle core together. Extra strong bonding ensures that no delamination occurs even under extreme moisture conditions or flooding. Coswick polyurethane adhesives are 100% formaldehyde free and are environmentally friendly.

Recommended for installation below, on or above ground. Can be installed on heated floors. Glue down over concrete with soundproof underlayment or wooden subfloor or nail down over wooden subfloor.